Hydro Jetting Services For Lafayette
We’ve all been through this before! Your drain starts getting slow and overflows. You may think it’s a temporary setback, that is until water simply stops flowing through the pipes altogether.
This is where hydro jetting comes to the rescue.
What Is Hydro Jetting?
Hydro jetting is a method by which clogs are eliminated from your plumbing pipes via the action of water pressure. This method removes the need to snake the drain, though it’s not just a matter of inserting a hydro jet hose and powering the machine up, as we’ll see shortly.
Hydro jetting can help flush your piping system, removing the clogs and preventing any chances of sewer backups. Some of the most common materials and substances that can be flushed with a hydro jet include:
- Limescale
- Grease and oil build-ups
- Debris
- Tree roots
Before hydro jetting was a thing, plumbers had to break the clog by puncturing it. This was a very cumbersome practice. Moreover, it didn’t take care of build-ups or break down lingering blockage causes.
How It’s Done
A professional plumber inspects the plumbing system beforehand in order to ensure whether a hydro jet is needed or not.
After that, the plumber will find a suitable spot to insert the hose. The hydro jet will then push highly-pressurized water (approximately 5,000 psi) to force the blockage into the sewer. It will also loosen up gunk and residues stuck to the pipe walls, which will then be flushed alongside the main clog.
When Is Hydro Jetting Necessary?
Water jetting is only required when there is a recurring and severe clogging issue that affects drainage significantly.
One typical clue that might indicate the need for a hydro jetting job is the presence of foul smells coming from your kitchen sink, coupled with water getting “stuck” at the bottom. This signals that the food residue is not going down the sewer as it should.
If the drainage problem is mild enough, you can try salvaging it using homemade solutions such as baking soda and soapy water. Warm water can also be helpful since heat excites the water molecules, which then interact with the stuck material to break it apart and loosen it up.
Is Hydro Jetting Safe?
While hydro jetting is a non-invasive solution capable of removing blockages effectively, it’s not without its risks. For one, water jetting can potentially make matters worse if pipes suffer from root infestation and it’s not done correctly, as the integrity of the lines may be in jeopardy.
Furthermore, the procedure will be for naught and would actually be detrimental if your piping’s waterproof coating is weakened.
When factoring all of this into the equation, it’s easy to see why you’d need the help of a professional plumber who can thoroughly inspect the pipes and ensure that their conditions are optimal for a hydro jetting job. The plumber also would know how to maneuver the hose and avoid sensitive areas.
What’s more, handling a hydro jet is a perilous endeavor that could provoke serious injuries, courtesy of the astronomical pressure by which water is propelled through the machine hose. Never try to handle this machine yourself without proper risk management or knowledge! Call Anderson Plumbing today- (765) 414-2080!